Last Revised: Σεπτεμβρίου 13, 2018.  

• New program version is available with additional topics as:
• Serviceability limit case (SLS), full analysis, deflection and crack control for plates and beams
• Isolated columns extended analysis with second order effects
• Tables and Design charts with Eurocode 2 as: Kd , med w, effective length
• Ultimate strength interaction diagrams, biaxial bending and compression charts
• Implementation of of National Annexes for CEN member countries
  

Cost of Upgrade 120 Euro. We will contact all our customers by e-mail.
When you request the new version you will receive a new address for the Upgrade.

If you update your BETONexpress from the main menu the ordinary way, you will not install the new version 07.11.2011, but the previous version before the latest upgrade.  

BETONexpress can also run as a post processor of various Finite Element Programs (ANSYS, SAP2000,) to perform the concrete element design. The communication of BETONexpress with other programs can be done with a command file in simple text format. Each line of this Command line file describes an object that is going to be created in BETONexpress. Commands and data can be read in BETONexpress and the design objects are automatically created. The format of the command text file is described here.  Also in Annex of new User Manual.

New features:

• Limits for redistributed moments in continuous beams and plates, EN 1992-1-1 :2004, 5.5 (4).
  e_uk is needed to classify the steel at A,B,C classes, Eurocode2, Annex C. This new version is containing the default values for e_uk, but you must then reset the values of steel propertiers. Go to [Parameteres/reinforced steel properties], click on [Locked] to unlock, then [Reset] to take the new steel properties. This wil not reset other material properties of the program.  

• Shear check for plates.

A new version of BETONexpress for concrete design adapted to the latest versions of Eurocodes is available.

Cost of Upgrade 120 Euro. We will contact all our customers by e-mail. If you request the new version you will receive a new address for the Upgrade.

If you upgrade your BETONexpress from the main menu the ordinary way, you will not install the new version 03.02.2007 with EN adaptions and automatic generation of CAD drawings. If you request the new version you will receive a different address for the Upgrade.

The new version includes all previous options.

New in BETONexpress Version 03.02.2007

For concrete design Eurocode 2, EN 1992-1-1:2004, Design of concrete structures, General rules and rules for buildings.
For geotechnical design, Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules.
For concrete design you can now choose Eurocode 2, EN 1992-1-1:2004 or (EC2) ENV 1992 Design of concrete structures.
For geotechnical design you can choose Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules or (EC7) ENV 1997 Geotechnical design

What more is new:
� Automatic generation of CAD drawings for spread footings, retaining walls, corbels and deep beams.
� Steel schedule for every design object in the end of its report.
� Export of Report to PDF and Word format.
� New adjustments of report, references aligned, bold. etc.
� New algorithm for steel bar selection.
� Choose units for rebar representation in reports.
� Adjustments of Reinforcing steel bar weight.

Plates
� Continuous plates - Coefficient of load distribution (k) for each span.
� Two way slabs - Computation of design bending moment values based on tables by Czerny and Bares

Beams
� Axial force (tension or compression) in section forces.
� Small eccentricity

Columns
� The diagrams for single and double bending are computed by numerical integration of forces over the cross section, and they are shown in the report.
� Diagrams for column section capacity in single and double bending and FRP strengthened columns

Footings
� Depth of footing, and soil weight over footing
� Negative (upwards) axial load
� Loading cases Geo, STR, EQU according to EC7
� CAD drawings
� In Parameters/Parameters for reinforced concrete/Footings you can specify if you want for the min and maximum reinforcing steel areas to apply the requirements for plates �9.3.1. Eurocode 2 is not clear on this subject.

Retaining walls
� More wall shapes
� Loading cases Geo, STR, EQU according to EC7
� CAD drawings
� In Parameters/Parameters of retaining walls/Eurocode 2 you can specify if you want for the min and maximum reinforcing steel areas to apply the requirements for plates �9.3.1. Eurocode 2 is not clear on this subject.
� base key, to improve sliding conditions

Corbels
� CAD drawings

Deep beams
� CAD drawings

To install this version, enter BETONexpress/Update. .

Save to disk and unzip to where the program is already installed. 

This upgrade is still based on the ENV version of Eurocode 2. The upgrade is free of charge.

After the upgrading, when you first run the program again, we advise you to go to the menu Parameters/View parameters settings and click on [RESET to all original values] in order to reset to the new default values.

For old files you have to recompute the design objects.

 In this version, Ver. 05.11.06, following improvements and additions are done: 

• Automatic calculations as you alter the input data, and direct preview of full report.

• New design of reports, with alignment of the references at the right of the page. (this option can be canceled from Report setting/Paragraphs/Align references at right.)

• Reinforcement schedule is added in the end of each design object in the report. (this option may be canceled from Report setting/Graphic etc../ include rebar schedule in report)

• Export of report with drawings to PDF and Word files.

• You can select units for the rebar representation in the report from Setup/Units in report.

• You can adjust the rebar weight from Reinforcing steel properties/Weights.

 Plates

• Two ways plate analysis. The method of Czerny is added.

• In continuous plates, a load factor has been added at each span, to take care the two way load distribution in some cases.

 Beams

• Small eccentricity (solution diagrams included in report)

• Axial force (compression or tension)      

Columns

• New approach for single and double eccentricity with numerical integration. M-N diagrams obtained from numerical integration are included in the report.

• Column capacity, and column capacity with FRP. Diagrams have been added in the report.

Footings

• The depth of footing and the soil weight have been introduced.

• Negative (upward axial Load ) can be specified.

• The minimum reinforcement can be evaluated as plates (option Parameters of Reinforced concrete/Footings/requirements for min-max reinforcement as slabs), as the Eurocode is not clear on the subject.

Retaining walls

• More Wall shapes included.

• The minimum reinforcement can be evaluated as plates (option Parameters of retaining wall/Eurocode 2/requirements for min-max reinforcement as slabs), as the Eurocode is not clear on the subject.